You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.

HYDRAFORCE
5613002


$63.25 USD
  • HYDRAFORCE
  • Material:5613002
  • Model:RV50-26A-0-P-50/ RELIEF VALVE
  • Summary:PILOT OPERATED RELIEF VALVE U.S. PATENT # 7,137,406

Quantity in stock: 0

***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Hydraforce directly.***
The Hydraforce RV50-26A-0-P-50 (5613002) is a high-performance, screw-in, cartridge-style, pilot-operated spool type hydraulic relief valve. Engineered as a pressure-limiting device for demanding hydraulic circuits, this valve is renowned for its rapid response and low hysteresis. It effectively blocks flow from port 1 to port 2 until the pressure at port 1 is sufficient to activate the piloting relief, thereby shifting the main spool and allowing flow between ports. Notably, this valve is not suitable for cross-over relief applications. Key features include non-backable adjustments that prevent springs from going solid and a hardened spool and cage for extended durability. The RV50-26A-0-P-50 operates within a pressure range of 20.7 to 344.7 bar (300 to 5000 psi) and has proof and burst pressures of 517.1 bar (7500 psi) and 1037.7 bar (15050 psi), respectively. With a flow rating of up to 113.6 lpm (30 gpm) at maximum pressure and an internal leakage rate of up to 147 ml/min at 85% of maximum crack pressure, this valve ensures efficient operation under high-pressure conditions. The valve's cycle life is rated at 500,000 cycles at a pressure of 241.3 bar (3500 psi). It operates across various temperature ranges depending on the seal material used: -40 to 100 \u00b0C with Buna N seals; -26 to 204 \u00b0C with fluorocarbon seals; -54 to 107 \u00b0C with polyurethane or urethane seals. The RV50-26A-0-P-50 fits into VC10-2 cavities and requires an installation torque between 47.6 to 50.2 N-m, with a maximum allowable torque of up to 67.8 N-m. The unit weighs between approximately 0.24 kg to 0.29 kg depending on configuration and has an internal wetted surface area ranging from about 141 cm\u00b2 to161 cm\u00b2 based on model specifics.

Unit weight: 0.25 kg (0.55 lb)
A
0.27 kg (0.60 lb)
B
0.29 kg (0.65 lb)
C l
0.24 kg (0.53 lb)
F h

Internal wetted surface area: 141 cm² (21.8 in²)
A b c l
161 cm² (24.9 in²)
F h

RatingsPressure Ratings
Pressure rating: 344.7 bar (5000 psi)

Proof pressure: 517.1 bar (7500 psi)

Burst pressure: 1037.7 bar (15050 psi)

Relief pressure defined: Pressure evident at
7.57 lpm (2 gpm)

Reseat pressure: Nominal 90% of crack

Relief pressure range: 20.7 to 344.7 bar (300 to 5000 psi)
From zero to maximum control current

Flow Ratings
Flow rating: 113.6 lpm (30 gpm)
At max pressure

Maximum internal leakage: 147 ml/min (9 in³/min)
Port 2, at 85% of max crack

Other Ratings
Cycle life: 500000 cycles at
241.3 bar (3500 psi)

Temperature Ratings
Operating fluid temperature: -40 to 100 °C (-40 to 212 °F)
With buna N seals
-26 to 204 °C (-15 to 400 °F)
With fluorocarbon seals
-54 to 107 °C (-65 to 225 °F)
With polyurethane seals
-54 to 107 °C (-65 to 225 °F)
With urethane seals

Storage temperature: -40 to 70 °C (-40 to 160 °F)

Ambient temperature: -40 to 70 °C (-40 to 160 °F)
Operating ParametersFluids: Mineral based or synthetic with lubricating properties

Fluid viscosity range: 7.4 to 420 cSt

Maximum operating contamination level: 18/16/13 per ISO 4406
Performancehttps://www.hydraforce.com/globalassets/product-images/rv50-26_flow-pressure2022-02-24.gif

Installation SpecificationsCavity: VC10-2
10-size-2-way Cavities
Cartridge installation torque: 47.6 to 50.2 N-m (35 to 37 ft-lb)

Maximum allowable torque: 67.8 N-m (50 ft-lb)

H style plug torque: 10.8 to 13.6 N-m (8 to 10 ft-lb)

Orientation restriction: None
Order CodePOSITION CODE DESCRIPTION RV50-26F-H-J-R/S F Adjustment Option F A 1/4" Hex Allen Head F B 1-1/2" Diameter Aluminum Knob with Aluminum Lock Knob F C 1/4" Hex Allen Head with Cover Cap F F Factory Preset Non-Adjustable F H Factory Preset Hidden Adjustment F L 1/4" Hex Allen Head with Cover Cap and Lockwire Holes H Line Body H 0 No Body H 6T Aluminum SAE 6 H 8T Aluminum SAE 8 H 6TD Ductile Iron SAE 6 H 8TD Ductile Iron SAE 8 H 2B Aluminum BSPP 1/4" (2) H 3B Aluminum BSPP 3/8" (3) H 4B Aluminum BSPP 1/2" (4) H 4BD Ductile Iron BSPP 1/2" (4) J Seal J N Buna-N J V Fluorocarbon J P Polyurethane R Spring R 50 27.6 to 344.7 bar (300 to 5000 psi) Spring Range S Setting S MXXX Spring Setting in XXX bar S XX Spring Setting in XX psi (x 100)
https://www.hydraforce.com/globalassets/product-images/rv10-26_dim2022-02-24.gif


Seal kit: SK10-2X-B
X=n,v,p
SK10-2U-O
Urethane
Seal kit installation instructions
Housings:
Available
10-2w valve bodies