SUN HYDRAULICS
RELIEF CART
RBACKAN
$74.80
- SUN HYDRAULICS
- Material:RBACKAN
- Model:RBAC-KAN
- Summary:Cartridge
Quantity in stock: 20
***Disclaimer: The following summary contains information gathered from various sources such as product descriptions, technical specifications and catalogs. While efforts have been made to provide accurate details, inaccuracies may occur. It is advised to verify all information by contacting Sun Hydraulics directly.***
The Sun Hydraulics RBACKAN (Material Number: RBACKAN) is a direct-acting, pilot relief cartridge designed to remotely control the pressure setting of other pilot-operated valves. This specific cartridge is suitable for systems using phosphate ester fluids, as it is configured with EPDM seals that can be damaged by petroleum-based fluids. It features a main stage orifice protected by a 150-micron stainless steel screen, making it ideal for load-holding applications. The valve's back pressure on the tank port is directly additive to the valve setting at a 1:1 ratio. The RBACKAN model incorporates Sun's floating style construction, minimizing internal part binding due to excessive installation torque or cavity/cartridge machining variations. It has a capacity of 0.25 gpm (1 L/min) and can operate at a maximum pressure of 5000 psi (350 bar), with a typical response time of 2 ms and maximum valve leakage at 110 SUS (24 cSt) of 5 drops/min (0.3 cc/min). The valve is adjustable throughout its full range using W or Y controls unless specified otherwise for special settings. Installation requires specific torques, with the valve hex size being 7/8 in. (22.2 mm) and installation torque ranging from 30 to 35 lbf ft (41 to 47 Nm). The adjustment screw has an internal hex size of 5/32 in. (4 mm), while the locknut hex size is 9/16 in. (15 mm), requiring a torque between 80 to 90 lbf in. (9 to 10 Nm). Weighing approximately .30 lb (.15 kg), this cartridge also comes with an optional Viton seal kit under part number 990010006 for added versatility and compatibility with various system requirements.
The Sun Hydraulics RBACKAN (Material Number: RBACKAN) is a direct-acting, pilot relief cartridge designed to remotely control the pressure setting of other pilot-operated valves. This specific cartridge is suitable for systems using phosphate ester fluids, as it is configured with EPDM seals that can be damaged by petroleum-based fluids. It features a main stage orifice protected by a 150-micron stainless steel screen, making it ideal for load-holding applications. The valve's back pressure on the tank port is directly additive to the valve setting at a 1:1 ratio. The RBACKAN model incorporates Sun's floating style construction, minimizing internal part binding due to excessive installation torque or cavity/cartridge machining variations. It has a capacity of 0.25 gpm (1 L/min) and can operate at a maximum pressure of 5000 psi (350 bar), with a typical response time of 2 ms and maximum valve leakage at 110 SUS (24 cSt) of 5 drops/min (0.3 cc/min). The valve is adjustable throughout its full range using W or Y controls unless specified otherwise for special settings. Installation requires specific torques, with the valve hex size being 7/8 in. (22.2 mm) and installation torque ranging from 30 to 35 lbf ft (41 to 47 Nm). The adjustment screw has an internal hex size of 5/32 in. (4 mm), while the locknut hex size is 9/16 in. (15 mm), requiring a torque between 80 to 90 lbf in. (9 to 10 Nm). Weighing approximately .30 lb (.15 kg), this cartridge also comes with an optional Viton seal kit under part number 990010006 for added versatility and compatibility with various system requirements.
Direct-acting, pilot relief cartridges are used to remotely control the pressure setting of other pilot-operated valves. Because capacity is limited to pilot flow, these valves should be used with other higher flow valves.
- Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
- Main stage orifice is protected by a 150 micron stainless steel screen.
- Suitable for use in load holding applications.
- Back pressure on the tank port (port 2) is directly additive to the valve setting at a 1:1 ratio.
- W and Y controls (where applicable) can be specified with or without a special setting. When no special setting is specified, the valve is adjustable throughout its full range using the W or Y control. When a special setting is specified, this setting represents the maximum setting of the valve.
- Corrosion resistant cartridge valves are intended for use in corrosive environments and are identified by the model code suffix /AP for external stainless steel components, or /LH for external zinc-nickel plated components. See the CONFIGURATION section for all options. For further details, please see the Materials of Construction page located under TECH RESOURCES.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
Cavity | T-10A |
Series | 1 |
Capacity | .25 gpm1 L/min. |
Maximum Operating Pressure | 5000 psi350 bar |
Response Time - Typical | 2 ms2 ms |
Maximum Valve Leakage at 110 SUS (24 cSt) | 5 drops/min.0,3 cc/min. |
Adjustment - Number of Clockwise Turns to Increase Setting | 55 |
Valve Hex Size | 7/8 in.22,2 mm |
Valve Installation Torque | 30 - 35 lbf ft41 - 47 Nm |
Adjustment Screw Internal Hex Size | 5/32 in.4 mm |
Locknut Hex Size | 9/16 in.15 mm |
Locknut Torque | 80 - 90 lbf in.9 - 10 Nm |
Model Weight | .30 lb0,15 kg |
Seal kit - Cartridge | Viton: 990-010-006 |
Show FAQ
Additional Resources
- Pilot-Operated, Balanced Poppet, Anti Shock Reliefs
- CavitySaver multi-function valves deliver single-cartridge solutions
- 'Soft' Relief Eliminates Pressure Spikes
- Tri-Grip Handknob Now Offered From Sun as a Standard Control Option
- QuickDesign with SmartConnect Offers Drag-and-Drop Schematic Tool
- Sun Introduces 'Hybrid' Valves
- CE/TÜV Certified Pressure Relief Valves
- Pressure Relief and Regulating Cartridge Valve Technical Tips
- Pilot Operated, Balanced Poppet Relief Valves
- Sun Expands Corrosion-Resistant Solutions
- Sun Offers Zinc-Nickel Plating for Corrosion Resistance
- Sun Cartridges with EPDM Seals
- Series 4 PLUS Cartridges Offer Higher Flows with Lower Pressure Losses
- Manufacturing Sun Cartridge Cavities
- Pressure Relief and Regulating Valves
- Sun's Floating Style Screw-In Cartridge
- Units of Measure, Settings, and Conversions
- Cavity Information (S-171) and Tooling
- Sun Model Code Explanation; 999-901-334
- Cartridges: Materials of Construction
- Fluid and Temperature Recommendations
- Performance Data
Notes:
- For Series 1 cartridges configured with an O control (panel mount handknob), a .75 in. (19 mm) diameter hole is required in the panel.